FINISHING

Coil Pro

• #7 Buff- a highly reflective finish with grit lines
• #8 Buff Ultra Bright - the most reflective finish with slight directional lines
• Brush Finish - aluminum finish
• Scotch-Briting - process to clean watermarked, stained or soiled metal
• Two-sided finishing available
• Paper Interleave or choice of PVC
• Capabilities:
  Gauges: .013-.145, Width: 16"-50", Max Weight: 30,000#
  Coil O.D.: 60" Coil I.D. 16"-20"
  

Grinding Technology

• #3, #4, #6 & custom polishing
• Specializing in lighter gauge polishing
• Top and bottom finishing available
• Paper Interleave or choice of PVC
• Capabilities:
  Gauges: .010-.135, Width: 24"-62", Max Weight: 35,000#
  

Sheet & Plate Polishing (wet)
Hill Acme Vacuum Chuck

• #4, #6, Satin, Hairline, Brushed, Dairy
• Custom Finishes, RA Value
• Two side finishing with pvc top and bottom
• Capabilities:
  Gauges: .020-6", Width: 3"-72", Length: 6"-240"
  

Sheet & Plate Polishing (dry)

• #3, #4
• Pit removal or salvage polishing
• Two-sided finishing with pvc top & bottom
• Capabilities:
  Gauges: .022-1.50", Width: 6"-62", Length: Up to 360"
  

• #7, #8, Tanker-Bright
• Two-sided finishing with pvc top & bottom
• Capabilities:
  Gauges: .030-2", Width: 6"-96", Length: 12"-480"
  

Hill Acme Vacuum Chuck Grinding

• Alpha case removal
• Gauge Reduction, R.A. Value or Salvage Grinding
• Tolerances: +/-.003
• Capabilities:
  Gauges: .032-4", Width: 65", Length: 152"
  

Hill Acme Vacuum Chuck

• Alpha case removal
• Gauge Reduction, R.A. Value or Salvage Grinding
• Tolerances: +/-.003
• Capabilities:
  Gauges: .032-4", Width: 38.50", Length: 153"
  

Pinch Roll

• Alpha case removal
• Gauge Reduction, R.A. Value or Salvage Grinding
• Tolerances: +/-.003
• Capabilities:
  Gauges: .032-.250", Width: 52", Length: 360"
  

SLITTING

36" Yoder Slitting Line

• Handles light gauge material up to dead soft aluminum
• Edge trim .125 each side or .250 total
• Tolerances +/-.005
• Capabilities:
  Gauges: .010-.105, Width: 3-36", Min. Cut: .375", Weight: 10,000#
  

60" Cincinnati with Herr Voss leveler

• Handles all non-ferrous metals, non-oily or prepainted metal
• Edge trim and split your coil while side trimming
• Inspection of both sides of the material without side trimming or leveling
• Edge trimming 3/16th each side or 3/8th total
• Max O.D. 72"
• Tolerance +/-.005
• Paper Interleave or choice of PVC, top and bottom
• Capabilities:
  Gauges: S/S .018-.135, Aluminum .014-.190, Coil Width: 3"-60", Min. Cut: 1", Max Weight: 30,000#
• 1/4 Hard, 1/2 Hard, Full Hard Stainless
• Fiber cores
• Break coils, recoil, sample cuts available

Herr Voss Strand Extensioner*

• *Trade Mark of the Herr Voss Corporation
• Reduce edge wave weave, cross bow, camber and burr
• Improve strip shape equivalent to skin pass mill
• Diminish coil breaks, chatter marks and improve anti-fluting properties
• Upgrade secondary coils, improve coil shape or break coils into smaller ones

• Full range of protective masking for metal applications
• Special order masking available
• Apply customers own PVC
• Apply masking to both top and bottom or just the center of your material
• Paper interleaving available

CUT-TO-LENGTH

Cincinnati 48" cut-to-length line with tension leveler

• Paper Interleave or choice of PVC
• Capabilities:
  Gauges: S/S: .013-.135, Aluminum .013-.160, Width: 12"-48"
  Sheet Lengths: 16"-192", Length Tolerance: +.062-nothing, O.D.: 72"
  Max Weight: 30,000#
  
• Edge Trimming available
• Line Marking (up to 6)
• 1/4 Hard, 1/2 Hard, Full Hard

Cincinnati 72" cut-to-length with tension leveler

• Paper Interleave or choice of PVC
• Capabilities:
  Gauges: S/S: .040-.135, Aluminum .040-.190, Width: 6"-72"
  Sheet Lengths: 12"-240"
  Max Weight: 40,000#
  
• Edge Trimming available
• 300 ft a minute
• Line Marking (up to 6)
• 1/4 Hard, 1/2 Hard, Full Hard

• Full range of protective masking for metal applications
• Special order masking available
• Apply customers own PVC
• Apply masking to both top and bottom or just the center of your material
• Paper interleaving available

ADDITIONAL SERVICES

• Storage & warehousing
• Stock your metal or just faster delivery on non-processed metal
• 15 ton crane with sheet and coil lifter
• 15,000# fork trucks
• Coil upender
• Sheet racks
• Ground & shipping/receiving docks

Application or Removal of Protective Masking

Neutralizing Material

Repackaging, Weighing, Micing & Measuring Material